Hi,
We are using Untangle with captive portal for our public network, the business network is not going over Untangle.
We have everything working as long as Untangle is NATting however we don't want that, we want Untangle to route since our firewall is natting, but I can't get it to work: as soon as I remove the natting rule on the internal interface, it stops working. So, I'm missing a routing rule somewhere, something obvious, but I'm at a loss.
The network is: firewall with 172.20.1.252/24 on LAN -> routing switch doing all the routing for all business VLANs with 172.20.1.15 -> Untangle with 172.20.1.99 WAN (so this is in the firewall's LAN) and 172.22.255.250/16 LAN.
I have looked in the forums and found only that I need to add a route but I didn't find any specifics. I hope someone can help me figure this out,
Johan
We are using Untangle with captive portal for our public network, the business network is not going over Untangle.
We have everything working as long as Untangle is NATting however we don't want that, we want Untangle to route since our firewall is natting, but I can't get it to work: as soon as I remove the natting rule on the internal interface, it stops working. So, I'm missing a routing rule somewhere, something obvious, but I'm at a loss.
The network is: firewall with 172.20.1.252/24 on LAN -> routing switch doing all the routing for all business VLANs with 172.20.1.15 -> Untangle with 172.20.1.99 WAN (so this is in the firewall's LAN) and 172.22.255.250/16 LAN.
I have looked in the forums and found only that I need to add a route but I didn't find any specifics. I hope someone can help me figure this out,
Johan