Hello,
I am trying to configure two subnets, one for data and one for voice. The data subnet will be connected to a Windows DHCP server. The voice subnet will need DHCP from Untangle.
The HP 2910al switch will have VLAN2 added as the VoIP phone LAN port will be be configured as VLAN enabled and assigned VID=2. The PC connects to the other port on the phone with VLAN disabled.
I have set up two VLANs on the UT box but I can't get the phone and the PC to get an IP address from their respective subnet.
I would like to have both subnets connected to the switch with one cable.
Is this possible? If so, can someone point me in the right direction?
I am trying to configure two subnets, one for data and one for voice. The data subnet will be connected to a Windows DHCP server. The voice subnet will need DHCP from Untangle.
The HP 2910al switch will have VLAN2 added as the VoIP phone LAN port will be be configured as VLAN enabled and assigned VID=2. The PC connects to the other port on the phone with VLAN disabled.
I have set up two VLANs on the UT box but I can't get the phone and the PC to get an IP address from their respective subnet.
I would like to have both subnets connected to the switch with one cable.
Is this possible? If so, can someone point me in the right direction?