UT10 on UT9 VPN traffic not passing

I started a thread here thinking I had a VPN problem:
http://forums.untangle.com/openvpn/3...tml#post190524

I connected a UT10 client to UT9.4 server.
The UT10 connects to UT9.4 I can ping the boxes from the boxes. I can't ping the boxes from clients on the same subnet or on different subnets.
The networks are exported.
I rebooted the UT9.4 server and reconnected the 10 client and still no traffic is passing.
Internal interface on 10 is NOT NAT traffic on this interface.
Firewall module shows traffic trying to pass through as allowed.

Update after last thread:
I un-nat'd the internal interface. Internal clients on 192.168.12.0/24 subset can see each other internally.
The UT10 box, a VPN client, IP 192.168.12.1 on internal interface, is trying to route traffic destined for its internal clients over the VPN.

Wed Aug 20 2014 11:08:54 GMT-0500 (Central Standard Time) - Test Started
traceroute to 192.168.12.10 (192.168.12.10), 30 hops max, 60 byte packets
1 192.168.11.1 (192.168.11.1) 34.064 ms 39.958 ms 39.965 ms
2 * * *
3 * * *
4 * * *
5 * * *

Besides no NAT rules, is there something I need to configure?
What am I missing in UT10?