Build: 10.2.1~svn20140618r37923release10.2-1squeeze
Kernel: 2.6.32-5-untangle-686
Running untangle in router mode. Here is what we have;
LAN = 172.16.X.1
vlan 100 = 10.8.X.1
vlan 200 = 192.168.X.1
All 3 have DHCP & DNS handled by untangle. Network layout;
[modem}-----[untangle}-----[sg200}------[unifi AP]
We have with 3 SSID's;
PRIVATE > LAN
SHOP > VLAN100 tagged
PUBLIC > VLAN200 tagged
Private SSID works fine. Users get assigned an IP by the untangle DHCP server.
SSID 2&3 do not. Clients dont get an IP and if i manually assign an ip in their respective network, things still do not work. Cant ping AP or untangle.
If we remove the vlan tag from ssid 3&3 they both work normally. This setup was working properly until a few weeks ago. ssid 2&3 simply stopped working.
How can i troubleshoot?
Kernel: 2.6.32-5-untangle-686
Running untangle in router mode. Here is what we have;
LAN = 172.16.X.1
vlan 100 = 10.8.X.1
vlan 200 = 192.168.X.1
All 3 have DHCP & DNS handled by untangle. Network layout;
[modem}-----[untangle}-----[sg200}------[unifi AP]
We have with 3 SSID's;
PRIVATE > LAN
SHOP > VLAN100 tagged
PUBLIC > VLAN200 tagged
Private SSID works fine. Users get assigned an IP by the untangle DHCP server.
SSID 2&3 do not. Clients dont get an IP and if i manually assign an ip in their respective network, things still do not work. Cant ping AP or untangle.
If we remove the vlan tag from ssid 3&3 they both work normally. This setup was working properly until a few weeks ago. ssid 2&3 simply stopped working.
How can i troubleshoot?