Hi,
We want to give wifi to people in our waiting room through a dedicated Internet connection (WAN2) with captive portal.
We don't want to balance traffic between WANs, we want both networks to be completely separate. Can it be done on a single box?
Current Untangle box with 4 NICs.
Eth0 -->WAN1 1.2.3.4
Eth1 -->LAN1 Internal 192.168.10.1/24
Eth2 -->WAN2 5.6.7.8
Eth3 -->LAN2 Wireless AP plugged into this interface
How do I get the wireless LAN to NAT out through WAN2?
If I configure LAN2 as an addressed LAN interface in a different subnet to the Internal LAN e.g. 192.168.20.0 /24. Then add a NAT RULE from it's interface to "custom" and put in the WAN2 IP, will this work? I am thinking it will still route through WAN1?
TIA
We want to give wifi to people in our waiting room through a dedicated Internet connection (WAN2) with captive portal.
We don't want to balance traffic between WANs, we want both networks to be completely separate. Can it be done on a single box?
Current Untangle box with 4 NICs.
Eth0 -->WAN1 1.2.3.4
Eth1 -->LAN1 Internal 192.168.10.1/24
Eth2 -->WAN2 5.6.7.8
Eth3 -->LAN2 Wireless AP plugged into this interface
How do I get the wireless LAN to NAT out through WAN2?
If I configure LAN2 as an addressed LAN interface in a different subnet to the Internal LAN e.g. 192.168.20.0 /24. Then add a NAT RULE from it's interface to "custom" and put in the WAN2 IP, will this work? I am thinking it will still route through WAN1?
TIA
